Page Comparison

Total the interest column

Treasury / Admin Portal

This table will allow Treasury to view interest paid within a certain time frame. This table will also allow Treasury to view a specific deposits history without navigating to a date in the main deposits table.

Question (5/27): Does Treasury want to see declined or VOID deposits on this table? If so, what would the values be?

Answer (6/8): Declines and voids are not to be including in the Deposit History. Deposit History will maintain deposits that collect interest. Declined or Voided deposits will not be part of the ACH report.

Declined or void deposits will be housed in the bank event log with dates, interest, and amount values. (TREASCD-125).

User Story:

ABC Bank requested for two new separate deposits on 01/01/2021. Both the deposits were for the same amount and since they were opened on the same day, they also have the same rate. ABC Bank continued to renew both deposits until 09/03/2021 when they decided to retire one of their deposits and renew the other deposit.

As a Treasury user, I am looking at ABC Bank and I want to see what the history was for ABC Bank’s deposits from 01/01/2021 - 10/02/2021. I also want to understand how much interest had been paid from 01/01/2021 - 10/02/2021. By filtering the Bank Deposit History table by 01/01/2021 - 10/02/2021 I am able to see the deposits that were active during those dates and their life by referencing their Deposit ID. I see that we collect $61.00 from 01/01/2021 - 10/02/2021 in interest. I can filter the Deposit ID column to see which renewals are associated with which original deposit when we first funded the monies.

Requested: 05/12/2022

Change Request | Internal Documents, Document Library

Internal Documents, Document Library

Add a checkbox to the Document Library (on the admin side) upload to mark a specific document as ‘private’. All documents that are not marked as ‘private’ will be displayed to Banks in document library.

Treasury can edit a document upload to check or uncheck ‘private’ later.  

Both Portals

Treasury has a document library for Banks currently. Initially this library was not to be shared with Banks. The library now needs to be shared with banks with the ability to mark documents as ‘private’ if they don’t want the banks to see them.

Requested: 05/12/2022

Change Request | Bank, Deposit History Tab | Admin Portal

Create a tab under Admin Portal Bank: Deposit History. The tab will include a table of deposit history with the ability to view all history or filter to view a specific date range or status.

Table will default to show ALL history.

Filters:

• Date Range

  • Date filter will show all deposits within the range selected. If a deposit was active during the range selected, it will display in the table.

• Status (dropdown)
  

Search and Export:

• Search field

• EXCEL and PDF export
  

Table Columns:

• Status

• Type

• Deposit Date

• Maturity Date

• Term

• Interest Paid

  • Display the interest paid based on the date range selected or if no date range is selected show interest paid as of the current date.

• Amount

• Rate

• Deposit Number

• Deposit ID (details found in ticket

  Jira Legacy
  server System JIRA serverId c76ed893-9292-3c50-a783-d9afa913f29c key TREASCD-299

  )

Total the interest column

5.3.2

Treasury / Admin Portal

This table will allow Treasury to view interest paid within a certain time frame. This table will also allow Treasury to view a specific deposits history without navigating to a date in the main deposits table.

Question (5/27): Does Treasury want to see declined or VOID deposits on this table? If so, what would the values be?

Answer (6/8): Declines and voids are not to be including in the Deposit History. Deposit History will maintain deposits that collect interest. Declined or Voided deposits will not be part of the ACH report.

Declined or void deposits will be housed in the bank event log with dates, interest, and amount values. (TREASCD-125).

User Story:

ABC Bank requested for two new separate deposits on 01/01/2021. Both the deposits were for the same amount and since they were opened on the same day, they also have the same rate. ABC Bank continued to renew both deposits until 09/03/2021 when they decided to retire one of their deposits and renew the other deposit.

As a Treasury user, I am looking at ABC Bank and I want to see what the history was for ABC Bank’s deposits from 01/01/2021 - 10/02/2021. I also want to understand how much interest had been paid from 01/01/2021 - 10/02/2021. By filtering the Bank Deposit History table by 01/01/2021 - 10/02/2021 I am able to see the deposits that were active during those dates and their life by referencing their Deposit ID. I see that we collect $61.00 from 01/01/2021 - 10/02/2021 in interest. I can filter the Deposit ID column to see which renewals are associated with which original deposit when we first funded the monies.

Requested: 05/12/2022

Change Request |

Update event history note ‘Deposit set to Retire' to 'Renewal Declined’. This event should display in the Master, Bank and deposits event log.

Treasury / Admin Portal

This change will clarify an event log entry.

Requested: 05/23/2022

5.3.2

Both Portals

Treasury has a document library for Banks currently. Initially this library was not to be shared with Banks. The library now needs to be shared with banks with the ability to mark documents as ‘private’ if they don’t want the banks to see them.

Requested: 05/12/2022

Change Request |

Event wording, Renewal Declined

Update event history note ‘Deposit set to Retire' to 'Renewal Declined’. This event should display in the Master, Bank and deposits event log.

5.3.2

Treasury / Admin Portal

This change will clarify an event log entry.

Requested: 05/23/2022

Change Request | Available Deposit Types Section, Dashboard | Treasury Portal

Display the Available Deposit Types section on the Treasury Dashboard. Only display the deposit/term that is selected on Available Deposit Types & Terms (Treasury Admin).

Add section above ‘Deposit Information’ section.

Add ‘Last Rate Update' below the table inside this section.

This section will not have an effective rate picker. A different effective date will confuse the ‘Last Rate Update’ field. If Treasury needs to look at different rates, they will leverage the Rates tab OR the Available Deposit Types and Terms tab.

5.3.2

Treasury / Admin Portal

Relates to 260 and 259.

05/27  Add a dashboard section to display rates Banks can select for Treasury to view without navigating to Admin, Available Deposit Types and Terms.

Treasury wants to move Last Rate Update under this section (outside of the table) because it makes more sense to live here then alone towards the top of the dashboard.

Requested: 05/27/2022

Change Request | Pools History, Active Deposits Balance

Within the Pools History section add an ‘Active Deposits Balance’. The balance will include a calendar picker and a dollar value display. The date chosen on the calendar picker will populate the dollar value with the number of active deposits on the date chosen.

This value will be the same value as the Daily Deposits table Amount column totaled.

Active deposits – Includes deposits with the status of Active, Action Required, and Retire (as opposed to Retired which indicate an inactive deposit or deposit that was previously active).

When exporting the table, include the date range (if chosen) and Active Deposit Balance (if end date is chosen).

Treasury / 5.3.2

Treasury / Admin Portal

 Requested: 06/30/2022

 Treasury needs the ability to view the active deposits on a given date to reconcile with STARS (external application).

Enhancement | Bank Dashboard, ‘Upcoming Maturities’ | Bank Portal

Bank Dashboard

‘Upcoming Maturities’ button. Value is the count of deposits with an upcoming maturity (7 days). If the user clicks the button, they are navigated to the deposits tab.

5.3.2

Bank Portal

Enhancement: 07/28/2022

Change Request | Allow Bank to look at past rates on Available Deposit Types, Bank Dashboard

Allow Bank to look at past rates on Available Deposit Types, Bank Dashboard.

Bank can view the past 4 weeks

5.3.2

Bank Portal

Requested: 06/14/2022

This will allow Banks to understand how the rates are trending. Especially when there are not rates entered for the current week.

Enhancement | Sort Document Library by Date

Sort Document Library by Date for bank portals

Bank Portal

Enhancement: 10/20/2022

This was noticed by Tanner during testing.

Change Request | Funding Deposits table

Summary: Create a table under the Deposits tab called Funding Deposits.

Table columns: Bank name, deposit date, term, status, type, amount, account number last 4, and ‘Completion’ column. 

‘Completion’: In the column, there should either be a ‘Complete’ button, or the word ‘Completed’. 
Treasury will click ‘Complete’ and that will change the cell from a ‘Complete’ button to the word ‘Completed’. 
Only retain data in this table for seven years after the deposit maturity.

Treasury / Admin Portal

Requested: 10/20/2022

Related to: Matured Deposits | Admin Approval Queue | Admin Portal – 276

10/24/2022

Tanner to ask development team if we can a column called ‘Account Number’ and display the bank account last 4.

Development team can display the account number, ticket updated.

Change Request | Remove/Delete User

Add the ability to remove/delete a user. If a user is deleted and a new user is created with the same email information, do not stop the creation of the user. If a user is removed/deleted, keep their information on the event logs and agreements signed.

When a user is deleted, show in master and bank event log with the user name in the event.

Treasury needs this because the list will soon grow to be too large if they cannot remove accounts. We may want to retain this information but hide from the IDMS view.

5.3.2

Treasury Portal

Requested: 08/28/2022

Change Request |

The following events currently display on a deposits event log. Please add these events to the Banks event log (Notes). Bank event log can only be viewed by a Treasury administrator.

• Admin declined deposit (Deposit Number: [display number], Bank: [display bank name)

• Bank declined deposit (Deposit Number: [display number], Bank: [display bank name)

• Admin approved deposit (Deposit Number: [display number], Bank: [display bank name)

• Bank approved deposit (Deposit Number: [display number], Bank: [display bank name)

Relates to

Funding Deposits table

Summary: Create a table under the Deposits tab called Funding Deposits.

Table columns: Bank name, deposit date, term, status, type, amount, account number last 4, and ‘Completion’ column. 

‘Completion’: In the column, there should either be a ‘Complete’ button, or the word ‘Completed’. 
Treasury will click ‘Complete’ and that will change the cell from a ‘Complete’ button to the word ‘Completed’. 
Only retain data in this table for seven years after the deposit maturity.

5.3.2

Treasury / Admin Portal

Requested: 10/20/2022

Related to: Matured Deposits | Admin Approval Queue | Admin Portal – 276

10/24/2022

Tanner to request for full list of events in the Master, Bank and Deposit logs.List of all events is belowask development team if we can a column called ‘Account Number’ and display the bank account last 4.

Development team can display the account number, ticket updated.

Remediation | Incorrect Values, Deposits > Summary, Deposits Held and Deposit Pool Percentage | Admin/Treasury Portal

Summary table is displaying banks that do not have an active deposit. This table should only show banks with active deposits.

This issue occurs in production. In the Deposit Summary table the Deposits available and Deposit pool percent are not populating correctly for all deposits. Some are showing, but they all should be populating.

How are we calculating these values?

Treasury / Admin Portal

10/25/2022

We will hold off on making these changes until the end of 5.3.2 to make sure Treasury has finalized.

Revisit this section in daily IDMS meeting.

11/07/2022

Change Request | Add Events, Bank Event Log

The following events currently display on a deposits event log. Please add these events to the Banks event log (Notes). Bank event log can only be viewed by a Treasury administrator.

• Admin declined deposit (Deposit Number: [display number], Bank: [display bank name)

• Bank declined deposit (Deposit Number: [display number], Bank: [display bank name)

• Admin approved deposit (Deposit Number: [display number], Bank: [display bank name)

• Bank approved deposit (Deposit Number: [display number], Bank: [display bank name)

Relates to

Remediation | Admin Approved deposit, not removed

In test we have an ‘Admin Approved’ deposit that has not been removed after the deposit date.

22nd State Bank 16910-00013

Treasury / Admin Portal

10/25/2022

This issue occurred due to the bug found on

5.3.2

Treasury / Admin Portal

Requested: 10/20/2022

10/24/2022

Tanner to request for full list of events in the Master, Bank and Deposit logs.

List of all events is below.

Change Request |

Neither of these fields below are populating correctly.

• Deposit Pool Percentage

  • Location: Bank > Bank Profile Tab and Bank > Deposit Tab

  • Logic: Amount Held/Treasury Deposit Pool

    • Amount Held (Total open/active deposits with the Bank)

    • Treasury Deposit Pool (found on Pools and Dashboard)

• Maximum Concentration

  • Location: Bank > Deposit Tab

  • Logic:

    • IF MULTI-STATE DEPOSITORY IS ‘YES’ THEN

      • Amount Held/Bank In-State Deposits

      • Maximum concentration = 15% of ‘BANK IN-STATE DEPOSITS’

    • IF MULTI-STATE DEPOSITORY IS ‘NO’ THEN

      • Maximum concentration = 15% of ‘BANK DEPOSITS’

Add another value to Bank

Treasury / Admin Portal

10/25/2022

We will hold off on making these changes until the end of 5.3.2 to make sure Treasury has finalized.

Revisit this section in daily IDMS meeting.

11/07/2022

Treasury will work on calculations separately and provide to the project team.

Pools Table, Export

Summary: In the current Pools export, include the parenthesis that are displayed in the pools table in the export files, Copy Excel CSV PDF Print.

5.3.2

Treasury/Admin Portal

Requested: 10/31/2022

Treasury emailed Tanner that the export file does not indicate if an amount is a debit or a credit. Treasury agrees that the export should include parenthesis as shown on the pools table.

Change Request | Update In-State Deposits reminder email

Currently, IDMS sends the Update In-State Deposits email reminder to multi state banks with active users. The reminder does not consider if the bank has deposits currently.

Change the Update In-State Deposits email reminder to send to multi state banks, with active deposits (Holding Treasury Deposits ‘NO’ on the Outstanding In State Deposits table) and active users.

5.3.2

Treasury/Admin Portal

Requested: 11/02/2022

Treasury emailed Tanner stating a bank should not have received a reminder to update their in-state deposits amount when they do not have an active deposit in IDMS.

Change Request | New Deposits, Weekly Email

Generate an email to be sent on Monday at 10:00 AM every week. The email will include a list of all deposits opened within the last week.

Subject: IDMS Deposits | Weekly Update

Body: Last week the following deposits were opened.

Bank Name, Amount, Deposit Date

This email should be sent to: young.boozer@treasury.alabama.gov

Treasury/Admin Portal

Requested: 10/31/2022

Treasurer, Young Boozer needs a way to receive a list of new deposits. Young has not made a specific request for this table but the Treasury staff is attempting to anticipate his needs.

5.3.2

Treasury

Reported: 11/07/2022

Values works in test.

Change Request | New

Summary: Create a table under the Dashboard tab called New Deposits.

Include deposits opened within the last 30 days. LOGIC: Deposit date IS today or in the past (within 30 days) AND deposit is ‘Completed’ on the Funding Deposits table.

Table columns: Bank name (hyperlink the bank), deposit date, term, type, rate, and amount

If there are no new deposits within the last 30 days, display wording “No new deposits within the last 30 days.”

Treasury/Admin Portal

Requested: 10/31/2022

Treasurer, Young Boozer needs a way to view new deposits. Young has not made a specific request for this table but the Treasury staff is attempting to anticipate his needs.

This information is going to be placed on the dashboard and will have similar columns to 369.

Daria mentioned the design updates shown in 2021/2022. NIC Alabama plans to continue to hold on redesign until the IDMS is complete.

Change Request | Pools Table, Export

Summary: In the current Pools export, include the parenthesis that are displayed in the pools table in the export files, Copy Excel CSV PDF Print.

Treasury/Admin Portal

Requested: 10/31/2022

Treasury emailed Tanner that the export file does not indicate if an amount is a debit or a credit. Treasury agrees that the export should include parenthesis as shown on the pools table.

Change Request | Remove Start Date Default, Pools History

Summary: Remove the start date default on the Pools History table.

Treasury/Admin Portal

Requested: 11/01/2022

Treasury would like the preset start date removed. In the future, they anticipate changing years and dates to be cumbersome and do not see the value in presetting the start date, unless it is required by NIC Alabama to complete the table logic.

Change Request | Update In-State Deposits reminder email

Currently, IDMS sends the Update In-State Deposits email reminder to multi state banks with active users. The reminder does not consider if the bank has deposits currently.

Change the Update In-State Deposits email reminder to send to multi state banks, with active deposits (Holding Treasury Deposits ‘NO’ on the Outstanding In State Deposits table) and active users.

Treasury/Admin Portal

Requested: 11/02/2022

Treasury emailed Tanner stating a bank should not have received a reminder to update their in-state deposits amount when they do not have an active deposit in IDMS.

Sections and Editable Values, Admin > Pools

Add two sections

1. Pool Concentration (previously maximum concentration)

2. Bank Concentration

New Fields:

Pool Concentration (section name)

• Pool Concentration Percentage

  • Edit on ‘Update Pools’

  • Display entered value on Pools tab

  • Percentage of the Total Deposit Pool (currently 10%)

    • Percentage values

• Pool Concentration

  • Not editable, value is calculated

  • Display dollar value calculated on Pools tab

  • Total Deposit Pool * Pool Concentration Percentage

Bank Concentration (section name)

• Bank Concentration Percentage

  • Edit on ‘Update Pools’

  • Display entered value on Pools tab

  • Percentage of Bank Deposits or In-State Deposits (currently 15%)

    • Percentage value

• LTD Minimum

  • Edit LTD Minimum under Pools ‘Update Pools’

  • Display entered value on Pools tab

  • Currently > OR = 50%

  • Percentage value

  • Loans/Deposits Ratio is an imported value in the quarter fiscal import. The LTD minimum is a separate value entered manually on the Pools tab.

5.3.2

Treasury

Requested: 11/09/2022

Treasury emailed a Word doc with these changes.

Need to review Summary Table calculations

Removed:

• Maximum possible value $100 million (currently)

  • QUESTION: Can we give this value a name?

    • Yes, Max Cap

    • Dollar amount

  • QUESTION: what if the Pool Concentration Percentage of the Total Deposit Pool exceeds the Ma?

    • Display the Pool Maximum Concentration

  • QUESTION: Does Treasury need to know/see this?

    • Yes, message should display if the Total Deposit Pool * Pool Concentration Percentage exceeds the Max Cap.

Remediation | File Quarter, Missing in production | Treasury/Admin Portal

File Quarter is missing in production. This value is populating as expected in test.

Treasury

Reported: 11/07/2022

Change Request | CRA Field, Bank Profile | Bank Portal

CRA; dropdown (outstanding, satisfactory, needs to improve, or non-compliant)

Allow Banks to edit the CRA field under Bank Profile section 2.

Create a modal that displays upon log in IF the CRA field is empty. Modal will require response to proceed forward and utilize the system.

Allow Treasury to edit this value under the bank edit function. Add value to section two.

If needs to improve or non-compliant is selected

5.3.2

Bank Portal

11/14/2022

Daria mentioned this field should also be added. It needs to be entered by the bank and can be edited at any time. Treasury will post an announcement related to the field on an annual basis as a reminder to update and we will create a modal that requires the value upon log in.

Change Request |

Add two sections

1. Pool Concentration (previously maximum concentration)

2. Bank Concentration

New Fields:

Pool Concentration (section name)

• Pool Concentration Percentage

  • Edit on ‘Update Pools’

  • Display entered value on Pools tab

  • Percentage of the Total Deposit Pool (currently 10%)

    • Percentage values

• Pool Concentration

  • Not editable, value is calculated

  • Display dollar value calculated on Pools tab

  • Total Deposit Pool * Pool Concentration Percentage

Bank Concentration (section name)

• Bank Concentration Percentage

  • Edit on ‘Update Pools’

  • Display entered value on Pools tab

  • Percentage of Bank Deposits or In-State Deposits (currently 15%)

    • Percentage value

• LTD Minimum

  • Edit LTD Minimum under Pools ‘Update Pools’

  • Display entered value on Pools tab

  • Currently > OR = 50%

  • Percentage value

  • Loans/Deposits Ratio is an imported value in the quarter fiscal import. The LTD minimum is a separate value entered manually on the Pools tab.

Treasury

Requested: 11/09/2022

Treasury emailed a Word doc with these changes.

Need to review Summary Table calculations

Removed:

• Maximum possible value $100 million (currently)

  • QUESTION: Can we give this value a name?

    • Yes, Max Cap

    • Dollar amount

  • QUESTION: what if the Pool Concentration Percentage of the Total Deposit Pool exceeds the Ma?

    • Display the Pool Maximum Concentration

  • QUESTION: Does Treasury need to know/see this?

    • Yes, message should display if the Total Deposit Pool * Pool Concentration Percentage exceeds the Max Cap.

Bank Portal

11/14/2022

CRA, Dashboard and Banks | Treasury Portal

Create table under ‘Banks’ titled ‘Non Compliant CRA Rating’. Only display banks if they have needs to improve or non-compliant as their CRA Rating.

Columns: Bank Name, CRA Rating, City, State, FDIC, and Holding Deposits

Create a button on the Dashboard titled: Non Compliant CRA Rating. The count should be the number of banks with needs to improve or non-compliant as their CRA Rating (same as Non Compliant CRA Rating table).

5.3.2

Treasury Portal

11/15/2022

Add table and count on dashboard to highlight the CRA ratings that are not compliant

Change Request | UPDATE Deposits, Summary | Treasury/Admin Portal

Total the following columns:

• Weighted average (this is not a sum total, value calculated on Dashboard Treasury Deposit Summary)

• Interest Total

• Number of Deposits

• Deposits Held

• Deposits Available

Summary table is displaying banks that do not have an active deposit. This table should only show banks with active deposits.

This issue occurs in production.

5.3.2

Treasury/Admin Portal

Requested: 11/17/2022

NOTE: The deposits available and Deposit Pool % are not calculating correctly.

Change Request | Bank Profile Values

Display values under the Bank tab > Deposits sub tab.

1. Treasury Deposits Remaining

2. Deposit Pool Percentage

3. Pool Concentration

   1. Pool Concentration IS Maximum Concentration

4. Bank Concentration

5. LTD Minimum

6. CRA

How are the values populated?

1. Treasury Deposits Remaining

   1. Calculated

      1. Pool Concentration - Amount Held (found in Treasury Deposit Summary)

         1. IF sum is negative THEN this is the Treasury Deposits Remaining value

            1. Display the negative value

         2. IF sum is positive THEN move to next criteria

      2. Loan to Deposit Ratio

         1. IF Loan / Deposits Ratio IS below LTD Minimum THE the Treasury Deposits Remaining value IS $0.00

         2. IF Loan / Deposits Ratio IS above LTD Minimum THE the Treasury Deposits Remaining value IS the Pool Concentration value

      3. Percent of Bank Deposits = (Bank Concentration Percentage * Bank Concentration) - Amount Held

         • IF calculated amount is greater than Pool Concentration value THEN the Treasury Deposits Remaining value is the Pool Concentration value

         • IF calculated amount is less than the Pool Concentration value THEN move to next criteria

2. Deposit Pool Percentage

   1. Amount Held (found in Treasury Deposit Summary) / Total Deposits Pool (found on Pools)

3. Pool Concentration

   1. Pool Concentration IS Maximum Concentration currently, update the title.

   2. Value calculated and displayed on Pools tab

4. Bank Concentration

   1. Calculate value

      1. IF ‘Multi-state Depository’ IS ‘yes’ THEN

         • Bank Concentration = 'Bank In-State Deposits' * Bank Concentration Percentage (found on Pools)

      2. IF ‘Multi-state Depository’ IS ‘no’ THEN

         • Bank Concentration = 'Bank Deposits' (value imported in fiscal data import)* Bank Concentration Percentage (found on Pools)

5. LTD Minimum

   1. Value entered on Pools tab

6. CRA

   1. Dropdown value entered by Bank OR Treasury

• Remove ‘Linked Deposits’ deposit type from the Treasury Deposit Summary table on Banks > ‘Select Bank’ > Deposits.

• Add new table ‘Linked Deposit Summary’ below the Treasury Deposit Summary table. This table will include all columns on the Treasury Deposit Summary.

  • CAN THIS TABLE BE HIDDEN IF THERE ARE NO LINKED DEPOSITS OPEN?

• Treasury Deposits on Banks > ‘Select Bank’ > Bank Profile (section 4) should only total the CD, TDOA, and Restricted

• Add ‘Linked Deposits’ on Banks > ‘Select Bank’ > Bank Profile (section 4) and display the total amount held for Linked Deposit deposit type.

Add value to

• Treasury Deposits Remaining

  • Pool Concentration - Bank’s Current Treasury Deposits (341)

    • Is the sum is negative, then the negative sum amount is the total deposits available

      • Sum= -1,000 then display 1,000?

5.3.2

Treasury/Admin Portal

Requested: 11/09/2022

Provided by Treasury:

BANK

MAXIMUM CONCENTRATION/ ***POOL CONCENTRATION

a)     10% of Total Deposit Pool

b)     Cannot exceed $100 million

 ***BANK CONCENTRATION***

a)     May Multi-State Depository – Answer is NO

i)      15% of Bank Deposits

b)     May Multi-State Depository – Answer is Yes

i)      15% of Bank In-State Deposits

TREASURY DEPOSITS REMAINING

a)     Pool Concentration minus Bank’s Deposit Held

i)      If sum is negative, then negative sum amount is the total deposits available

ii)     If sum is positive, then sum moves to next criteria

b)     Percent of Bank Deposits –

i)      If calculated amount is greater than 15%, then treasury deposits available becomes zero; no further calculations

ii)     If calculated amount is less than 15%, then amount available becomes the lesser of the sum from a)ii) or this calculation; go to next criteria

c)     Loan to Deposit Ratio

i)      If Loan/Deposit Ratio is below 50% then amount available becomes zero

ii)     If Loan/Deposit Ratio is 50% or above, then amount available is the same as 6)b)ii)

DEPOSIT POOL PERCENTAGE

a)     Bank’s Amount Held divided by Total Deposits Pool

TREASURY DEPOSITS

a)     Total Deposits Held – CD & TDOA

b)     ***Link Deposit will need a separate field***

CRA Rating

a)     Add CRA Rating dropdown in Bank FDIC Profile Box

b)     Dropdown to be Outstanding, Satisfactory, Needs to Improve and Substantial Noncompliance

c)     Bank will choose one

d)     If bank chooses Need to Improve or Substantial Noncompliance:

i)      Notation “CRA Rating” is made somewhere noticeable

Change Request |

Create table under ‘Banks’ titled ‘Non Compliant CRA Rating’. Only display banks if they have needs to improve or non-compliant as their CRA Rating.

Columns: Bank Name, CRA Rating, City, State, FDIC, and Holding Deposits

Create a button on the Dashboard titled: Non Compliant CRA Rating. The count should be the number of banks with needs to improve or non-compliant as their CRA Rating (same as Non Compliant CRA Rating table).

Treasury Portal

11/15/2022

Add table and count on dashboard to highlight the CRA ratings that are not compliant

Change Request | Treasury Deposit Summary, Dashboard | Treasury Portal

• Remove Certificate of Deposit (CD), Time Deposit Open Account (TDOA), and Restricted from Treasury Deposit Summary table

• Rename Treasury Deposit Summary table Linked Deposit Summary table

• Add new values to the top of the dashboard

  • Weighted Average: Display the weighted average (calculated on currently on the Treasury Deposit Summary)

    • Hyperlink 'Weighted Average', navigates to Deposits tab > Summary sub tab

  • Total Deposit Count: Display the total count of Certificate of Deposit (CD), Time Deposit Open Account (TDOA), and Restricted deposits.

    • Hyperlink ‘Total Deposit Count’, navigates to Deposits tab > Summary sub tab

• Hyperlink the existing values

  • Treasury Deposit Pool

    • Hyperlink, navigates to Admin tab > Pools sub tab

  • Treasury Deposits Available

    • Hyperlink, navigates to Admin tab > Pools sub tab

  • Active Deposits

    • Hyperlink, navigates to Deposits tab > Daily sub tab

• Organize values in this order

• Image Removed

Treasury Portal

11/15/2022

5.3.2

Treasury Portal

10/25/2022

Discussed the Deposits Available and Deposit Pool Percentage values not populating. Daria is going to speak with Young and ensure Treasury wants to calculate these values the same way or if they may need to change. We will hold off on making these changes until the end of 5.3.2 to make sure Treasury has finalized.

11/07/2022

Treasury will work on calculations separately and provide to the project team.

Change Request |

Restricted Bank required, Restricted Rate

To create a restricted rate for a deposit the bank MUST be a restricted bank.

5.3.3

Treasury Portal

Requested:

09/

15/2022

Enhancement | Sort Document Library by Date

Sort Document Library by Date for bank portals

5.3.3

Bank Portal

Enhancement: 10/20/2022

This was noticed by Tanner during testing.

Change Request | New Deposits, Weekly Email

Generate an email to be sent on Monday at 10:00 AM every week. The email will include a list of all deposits opened within the last week.

Subject: IDMS Deposits | Weekly Update

Body: Last week the following deposits were opened.

Bank Name, Amount, Deposit Date

This email should be sent to: young.boozer@treasury.alabama.gov

5.3.3

Treasury/Admin Portal

Requested: 10/31/2022

Treasurer, Young Boozer needs a way to receive a list of new deposits. Young has not made a specific request for this table but the Treasury staff is attempting to anticipate his needs.

Change Request |

New Deposits Table, Treasury Portal, Dashboard

Summary: Create a table under the Dashboard tab called New Deposits.

Include deposits opened within the last 30 days. LOGIC: Deposit date IS today or in the past (within 30 days) AND deposit is ‘Completed’ on the Funding Deposits table.

Table columns: Bank name (hyperlink the bank), deposit date, term, type, rate, and amount

If there are no new deposits within the last 30 days, display wording “No new deposits within the last 30 days.”

5.3.3

Treasury/Admin Portal

Requested: 10/31/2022

Treasurer, Young Boozer needs a way to view new deposits. Young has not made a specific request for this table but the Treasury staff is attempting to anticipate his needs.

This information is going to be placed on the dashboard and will have similar columns to 369.

Daria mentioned the design updates shown in 2021/2022. NIC Alabama plans to continue to hold on redesign until the IDMS is complete.

Change Request | Remove Start Date Default, Pools History

Summary: Remove the start date default on the Pools History table.

5.3.3

Treasury/Admin Portal

Requested: 11/01/2022

Treasury would like the preset start date removed. In the future, they anticipate changing years and dates to be cumbersome and do not see the value in presetting the start date, unless it is required by NIC Alabama to complete the table logic.

Change Request | Treasury Deposit Summary, Dashboard | Treasury Portal

• Remove Certificate of Deposit (CD), Time Deposit Open Account (TDOA), and Restricted from Treasury Deposit Summary table

• Rename Treasury Deposit Summary table Linked Deposit Summary table

• Add new values to the top of the dashboard

  • Weighted Average: Display the weighted average (calculated on currently on the Treasury Deposit Summary)

    • Hyperlink 'Weighted Average', navigates to Deposits tab > Summary sub tab

  • Total Deposit Count: Display the total count of Certificate of Deposit (CD), Time Deposit Open Account (TDOA), and Restricted deposits.

    • Hyperlink ‘Total Deposit Count’, navigates to Deposits tab > Summary sub tab

• Hyperlink the existing values

  • Treasury Deposit Pool

    • Hyperlink, navigates to Admin tab > Pools sub tab

  • Treasury Deposits Available

    • Hyperlink, navigates to Admin tab > Pools sub tab

  • Active Deposits

    • Hyperlink, navigates to Deposits tab > Daily sub tab

• Organize values in this order

• Image Added

5.3.3

Treasury Portal

11/15/2022

Change Request | Remove Linked Deposits, Deposits, Summary | Treasury/Admin Portal

Currently the Deposits tab > Summary sub tab includes Linked Deposits in the table values. Please remove Linked Deposits type from the table.

5.3.3

Treasury/Admin Portal

Requested: 11/17/2022

Change Request |

Remove .00 value

Remove the .00 from the dollar value in the following locations:

Treasury/Admin Portal

• Dashboard

  • Treasury Deposit Pool

  • Active Deposits

  • Treasury Deposits Available

  • Amount column in Top 5 Depositors table

  • Amount column in Linked Deposit Summary table (previously Treasury Deposit Summary)

• Bank Profile

  • TREASURY DEPOSITS

  • TREASURY DEPOSITS AVAILABLE

  • TREASURY DEPOSITS REMAINING

  • TOTAL TREASURY DEPOSITS

  • TOTAL DEPOSIT POOL

• Banks > select Bank > Deposits sub tab

  • Treasury Deposits Remaining

• Deposits tab > Summary sub tab

  • Deposits Held

• Admin tab > Pools sub tab

  • Total Deposits Pool

  • Active Deposits Amount

  • Linked Deposits Pool

  • Treasury Deposits Available

Bank Portal

• Bank Profile tab

  • Bank deposits

5.3.3

Treasury/Admin and Bank Portal

Requested: 11/17/2022

Change Request | Document Library, Rates | Treasury Portal

Add a document upload. Treasury may add documents at separate times when they add their rates.

5.3.3

Treasury

11/28/2022

Tanner to discuss internally